不同温度下油页岩热解及孔隙特征实验研究:以抚顺样品为例
投稿时间:2018-03-20  修订日期:2018-12-02  点此下载全文
引用本文:
摘要点击次数: 81
全文下载次数: 
作者单位E-mail
高涛 太原理工大学 894816124@qq.com 
赵静 太原理工大学 zhaojing19860207@163.com 
基金项目:国家自然科学基金资助项目(51704206);山西省应用基础研究面上青年基金资助项目(201701D221238)
中文摘要:利用马弗炉和热重分析仪对抚顺油页岩的热解特性进行分析,实验结果:300~600℃为抚顺油页岩的主要失重阶段,失重率约为20%。利用显微CT对高温作用后的油页岩样进行实验研究,结果显示:经过高温作用后,油页岩内部的孔隙和裂隙数目显著增多,但孔隙率值升高幅度小,表明大孔不发育,且孔隙大多处于孤立分布的状态,孔隙间相互连通性差,逾渗概率值较小,因此在开采初期应该采用水力压裂等方法提高其渗透性。
中文关键词:油页岩  热解  显微CT  孔隙率。
 
Experimental study on the pyrolysis and pore characteristics of oil shale at different temperatures-taking Fushun samples as exemple
Abstract:The muffle furnace and thermogravimetric analyzer were used to analyze pyrolysis characteristics of Fushun oil shale, the results showed that 300~600 ℃ are the main weightlessness stage of Fushun oil shale, and the weightlessness rate is nearly 20%. By conducting microscopic CT experiments on the oil shale samples after the action of high temperature, the results: after the effect of high temperature, a large number of pores and cracks are formed inside the oil shale, However, the increase of porosity is small, indicating that the macropore is not developed,and most of the pores are in a state of isolated distribution, with poor interconnectedness and less percolation probability. Therefore, hydraulic fracturing or other methods should be used to improve the permeability in the early stage of mining.
keywords:oil shale  pyrolysis  micro-CT  porosity.
  查看/发表评论  下载PDF阅读器
设备展厅
您是第4341565位访问者  备案许可证编号:京ICP备13036454号
版权所有:《中国矿业》杂志社有限公司
地  址: 北京市朝阳区安定门外小关东里10号院东小楼 邮编:100029 电话:010-68332570 88374940 E-mail: zgkyzzs@163.com