立井井壁竖向附加力的反演统计分析
投稿时间:2013-09-23  修订日期:2014-02-24  点此下载全文
引用本文:
摘要点击次数: 569
全文下载次数: 365
作者单位E-mail
刘金龙 合肥学院 建筑工程系 alnile@163.com 
陈陆望 合肥工业大学 资源与环境工程学院  
王吉利 中国科学院 武汉岩土力学研究所  
施小平 合肥工业大学 资源与环境工程学院  
基金项目:安徽省自然科学基金资助项目(No.1208085QE89)
中文摘要:立井井壁单位外表面积竖向附加力的数值较难准确确定,相关规范中仅注明了可根据具体条件按试验数据或经验选取。本文基于16个已破裂立井案例,通过破裂断面上的强度关系反演推算得到附加力的有效均值。计算结果表明:同一煤矿中不同立井的附加力值较为接近,不同煤矿的附加力值相差较大。预制混凝土结构与土体的接触不够紧密,故预制井壁的竖向附加力值较小。附加力的大小并不取决于立井的深度,而与地质条件有关。影响竖向附加力大小的因素众多,仅依照地质资料要准确确定某一矿井的竖向附加力取值是非常困难的。分析表明:若新建矿井的地质条件与本文反演计算中的矿井类似或相近,其竖向附加力可选相近矿井的相应值做参考。
中文关键词:关 键 词: 岩土工程  井壁  竖向附加力  统计分析
 
Inversion statistical analysis of vertical additive pressure at shaft wall
Abstract:It is very difficult to confirm the value of vertical additive pressure of unit surface area of shaft wall, which could be got by test or experience suggested by correlative code. Based on 16 ruptured shaft walls, the value of vertical additive pressure has been inversion statistical analyzed in this article. It is found that the value of vertical additive pressure of different shaft walls in a same coal mine are quite closed, while which has distinguishable difference at different coal mine. Due to loose contact between soil and precast concrete shaft wall, the value of vertical additive pressure of precast concrete shaft wall is very small. The value of vertical additive pressure is not depended on the depth of shaft wall, which depend on the engineering geology of shaft wall. While the value of vertical additive pressure is influenced by many factors, which could hardly be accurately evaluated only by engineering geology. It is indicated that if the conditions of shaft wall to be constructed is similar to the cases analyzed in this article, which value of vertical additive pressure could be quoted and referenced corresponding.
keywords:geotechnical engineering  shaft wall  vertical additive pressure  statistical analysis
查看全文  查看/发表评论  下载PDF阅读器
设备展厅
您是第5298125位访问者  备案许可证编号:京ICP备13036454号
版权所有:《中国矿业》杂志社有限公司
地  址: 北京市朝阳区安定门外小关东里10号院东小楼 邮编:100029 电话:010-68332570 88374940 E-mail: zgkyzzs@163.com